david@bcmetalfinishing.co.uk

01204 495818

Menu

Air Drying Phosphates

These are organic based phosphate etch processes, which improve the corrosion resistance and increase the adhesion of subsequent finishes.

The process forms a sealed phosphate coating and can be used as an alternative to conventional pretreatment processes. It is particularly suitable for treating components, which are too large for aqueous based treatment systems. It is also ideal for treating shot blasted components which require some temporary protection.

Air Drying Phosphates are suitable for use on steel, zinc and aluminium surfaces, also affording some degree of temporary protection, particularly on steel surfaces if the work has to be stored prior to painting.

When used on a mild steel substrate Metphos CL 333 Air Dry Phosphate Etch has given 1000 hours Neutral Salt Spray Corrosion Resistance with less than 2mm creep from the score.

For further technical information on our product range please call Brian on 01204 495818 or email us to see which process meets your individual requirements.


A typical example would be METPHOS CL 333 – Phosphate Etch Process
Metphos CL 333 is an organic based phosphate etch process used as an alternative to conventional pretreatment processes which improves the corrosion resistance and increases the adhesion of subsequent finishes. The process forms a sealed phosphate coating and can be applied through a conventional spray gun and is particularly suitable for treating components which are too large for aqueous based pre-treatment systems. It may also be used by immersion. It is suitable for use on steel, zinc and aluminium substrates and is ideal for treating shot blasted components which require some temporary protection.


Back

BC Metal Finishing

Phosphate Pretreatment Chemicals

A range of Phosguard products including manganese, zinc, zirconium and lightweight iron phosphate process which improve the corrosion resistance and adhesion when followed by paint or powder coatings.

BC Metal Finishing

Nano Treatments

These nano treatments or can we say Oxsilan replace the conventional lightweight iron and zinc phosphates. They are used on steel, zinc and aluminium substrates at room temperature and produce little or no sludge giving excellent adhesion and corrosion resistance.

BC Metal Finishing

Chrome Free Coatings

Phosguard NC 304 is a chrome free dry in place pretreatment for aluminium which can be made up in town’s water does not require post rinsing.