01204 495818


Corrosion Resistant Finishes

A range of dewatering oils and fluids which when applied to bare metal or phosphated substrates considerably enhance the corrosion resistance. They can be dry to touch.

These include Vapour Phase inhibitors for increased protection on internal surfaces. Rust inhibiting products are available for use in water tanks used for leak detection which provide temporary protection.

For further technical information on our product range please call Brian on 01204 495818 or email us to see which process meets your individual requirements.

A typical example would be Sealguard DF 479
Sealguard DF 479 is a solvent deposited film forming corrosion preventative used for displacing water from metal surfaces depositing an ultra thin film. It can be used as a final treatment in various metal finishing operations, being particularly suitable on surfaces which have been phosphated.


BC Metal Finishing

Phosphate Pretreatment Chemicals

A range of Phosguard products including manganese, zinc, zirconium and lightweight iron phosphate process which improve the corrosion resistance and adhesion when followed by paint or powder coatings.

BC Metal Finishing

Nano Treatments

These nano treatments or can we say Oxsilan replace the conventional lightweight iron and zinc phosphates. They are used on steel, zinc and aluminium substrates at room temperature and produce little or no sludge giving excellent adhesion and corrosion resistance.

BC Metal Finishing

Chrome Free Coatings

Phosguard NC 304 is a chrome free dry in place pretreatment for aluminium which can be made up in town’s water does not require post rinsing.